Water Filtration System 75GDP(Us) 4 Stage
Check items to add to the cart or select all
Details
Thanks to the deionisation stage, this RO system will remove almost 100% of tap water contaminants.
The Osmotics RO system includes:-
• 1 x 5 micron Sediment Pre-filter
• 1 x Carbon Block Pre-filter
• 1 x 700ml Deionisation Post-filter
• 1 x Feed Water Clamp
• 1 x Waste Water Clamp
• 1 x Filter Housing Wrench
• 2 Metres of Red Tubing
• 2 Metres of Green Tubing
• 2 Metres of Blue Tubing
• 1 x Membrane Flush Kit *
* Using the flush valve regularly increases membrane life.
Don't forget to buy a the TDS meter which monitors the solids content of the supply and filtered water and the 2.2 US gallon water storage tank. These items can be found on the related products tab.
The effectiveness and productivity of RO systems increases with greater water pressure and temperature. The actual flow rate (in GPD) of any reverse osmosis system depends on your water pressure and temperature.
While manufacturers state that 60 psi is required at the membrane for full production, we know that not everyone's cold water is at 60 psi and 77 degrees F therefore, we remind you that you might get less than 75 GPD, perhaps 50% or even less if your pressure and temperature are very low.
Product Attachments
 Water purification Size: (111.51 KB) |
